There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. Motorola BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-S4 where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Motorola, how can you go wrong? The BDA-S4 is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more.

User Ratings and Reviews

1 Star Unit has an over heating problem
Purchased the BDA-S4 in August to boost cable signals in our home setup. It was easy to install and worked great for 2 months. Now on 70 degree days it over heats and stops working. I wouldn’t recommend this unit for an exterior environment. It likely would work better in an interior application in a cool basement wiring closet. I don’t know what it’s temperature specifications are but be aware it does overheat.

5 Stars Amazing Analog Picture!
Absolutely amazing difference in analog picture quality! I used a two way splitter to run a line straight to my cable modem as recommended and attached the other cable to the Motorola Booster. From the booster I used three of the four hookups for signal to three TVs, one of which I split again with a good two way splitter so that I could drop a line to my computer TV card. Before I had horizontal lines on many of the channels and a couple were almost unviewable. The lines are all gone now and the picture on all three analog TVs and the computer is terrific! An unintended side effect is that my cable modem throughput has also increased because it is now being routed straight to the computer from the original two way splitter. I wish that I had done this years ago! If you have analog TVs with fuzzy or striped pictures I highly recommend this booster!

4 Stars Doesn’t seem to strengthen signal much
I live in the Evergreen area of San Jose, CA. With a Wineguard Squareshooter outdoor antenna, I realiably pick up most of the channels in my area, except for ABC7 and Fox2, which are flaky depending on time of day and weather conditions. I bought this signal booster to try to improve reception for those two channels. But I don’t see any real improvement, so I’ll have to give it only 3 stars.

5 Stars Great for Internet!
I bought this for my cable modem and I noticed a speed increase. The cable guy came by to replace my cable modem and even he noticed a significant speed increase with his bandwidth measuring device.

This will save you lots of time when streaming and downloading things off the internet, however, you might be spending more time on the internet since everything will be that much faster.

5 Stars Perfect Solution
This product took 5 minutes to install. I replaced my existing splitter and my HD Channel that was coming in at 60% jumped to 95%. I was receiving most channels well, but CBS was coming and going. Now I get CBS and other channels that I did not know even existed.

Buy/More Info

These compact, low cost converters enable analog TVs and digital ready TVs to receive off-air UHF and VHF digital television signals. Simply attach your antenna to the back of the converter
and it will convert your local broadcast stations standard, enhanced, and high-definition digital signals into an analog TV signal format. This converter connects to your television using your
choice of composite video (RCA jack) or 75 ohm RF cable.

Larger Buttons
More ventilation for Improved cooling
3 75 ohm RF cable with F-type connectors
Sleep timer
UL, FCC, and NTIA approvals

Connectivity
Single RF input (IEC 169-24 F-Type)
Single RF (F-Type) output with loop through
Composite video (RCA yellow connector)
Analog stereo RCA audio output (RCA white and red connectors)

Memory
2 MB Flash
16 MB DRAM

Power Supply
External high efficiency switch mode power supply
110V, 60HZ
Standby and sleep mode power saving feature.

Converter Dimensions
5W x 5D x 1.3H
Weight: 1.0 lbs.

Buy/More Info

These compact, low cost converters enable analog TVs and digital ready TVs to receive off-air UHF and VHF digital television signals. Simply attach your antenna to the back of the converter
and it will convert your local broadcast stations standard, enhanced, and high-definition digital signals into an analog TV signal format. This converter connects to your television using your
choice of composite video (RCA jack) or 75 ohm RF cable.

Standard Features (Same specs as DTA1020A, except slightly different shade of silver)
Channel 3/4 software selectable
Infrared remote control
V-chip parental control (version 2.0)
AC3 Dolby Digital Stereo down mixing
MPEG-1 layers 1, 2, 3 (MP3)
MPEG-2 MP@ML, MP@HL
Silver enclosure
Larger Buttons
More ventilation for Improved cooling
3 75 ohm RF cable with F-type connectors
Sleep timer
UL, FCC, and NTIA approvals

Connectivity
Single RF input (IEC 169-24 F-Type)
Single RF (F-Type) output with loop through
Composite video (RCA yellow connector)
Analog stereo RCA audio output (RCA white and red connectors)

Memory
2 MB Flash
16 MB DRAM

Power Supply
External high efficiency switch mode power supply
110V, 60HZ
Standby and sleep mode power saving feature.

Converter Dimensions
5W x 5D x 1.3H

Buy/More Info

These compact, low cost converters enable analog TVs and digital ready TVs to receive off-air UHF and VHF digital television signals. Simply attach your antenna to the back of the converter
and it will convert your local broadcast stations standard, enhanced, and high-definition digital signals into an analog TV signal format. This converter connects to your television using your
choice of composite video (RCA jack) or 75 ohm RF cable.

Larger Buttons
More ventilation for Improved cooling
3 75 ohm RF cable with F-type connectors
Sleep timer
UL, FCC, and NTIA approvals

Connectivity
Single RF input (IEC 169-24 F-Type)
Single RF (F-Type) output with loop through
Composite video (RCA yellow connector)
Analog stereo RCA audio output (RCA white and red connectors)

Memory
2 MB Flash
16 MB DRAM

Power Supply
External high efficiency switch mode power supply
110V, 60HZ
Standby and sleep mode power saving feature.

Converter Dimensions
5W x 5D x 1.3H
Weight: 1.0 lbs.

Buy/More Info

These compact, low cost converters enable analog TVs and digital ready TVs to receive off-air UHF and VHF digital television signals. Simply attach your antenna to the back of the converter
and it will convert your local broadcast stations standard, enhanced, and high-definition digital signals into an analog TV signal format. This converter connects to your television using your
choice of composite video (RCA jack) or 75 ohm RF cable.

Standard Features (Same specs as DTA1020A, except slightly different shade of silver)
Channel 3/4 software selectable
Infrared remote control
V-chip parental control (version 2.0)
AC3 Dolby Digital Stereo down mixing
MPEG-1 layers 1, 2, 3 (MP3)
MPEG-2 MP@ML, MP@HL
Silver enclosure
Larger Buttons
More ventilation for Improved cooling
3 75 ohm RF cable with F-type connectors
Sleep timer
UL, FCC, and NTIA approvals

Connectivity
Single RF input (IEC 169-24 F-Type)
Single RF (F-Type) output with loop through
Composite video (RCA yellow connector)
Analog stereo RCA audio output (RCA white and red connectors)

Memory
2 MB Flash
16 MB DRAM

Power Supply
External high efficiency switch mode power supply
110V, 60HZ
Standby and sleep mode power saving feature.

Converter Dimensions
5W x 5D x 1.3H

Buy/More Info